(주)페트로산업 로고

주)페트로산업 메인 네비게이션

Product Introduction

페트로산업 sub navigation

home

NT Sheet (NT-1000)

Not only the physical properties such as tension, elongation, and pitting but has excellent chemical resistance, cold resistance, and heat resistance. It uses the cold air method for the waterproofing method to combine excellent rubber asphalt gel with polyethylene film (HDPE).

Chracteristic

Acquisition of integration technology that combines HDPE with high-adhesion gels and physical performance
Stabilizes sheet along with the acquisition of adhesion strength due to the strong adhesion
Excellent fatigue resistance such as crack-folding due to the securing of high tensile and high elongation
Acquisition of environment stability and safety of workers where separate heat device is not needed
Acquisition of materiality that is stable in high temperature (60℃) and low temperature (-20℃)

Scope of Application

Building structures such as rooftop, upper part of underground parking lots, etc
Civil structures feared to penetrate rainwater or groundwater

Packaging Unit

THK : 1.5 / 2.0 / 3.0 mm
Width : 1M
Length : 10M (Sheet Size can vary)

Quality Standard

KS F 4934 / LH 42537

Test Items					Unit	Performance Standard
Test Items					Unit	KS	LH
Tensile Performance		Tensile Strength		Length Direction	N/mm	Above 3.0
		Tensile Strength		Width Direction	N/mm	Above 3.0
		Coefficient of Expansion		Length Direction	%	Above 200	Above 400
		Coefficient of Expansion		Width Direction	%	Above 200	Above 400
Tearing Performance				Length Direction	N	Above 25
Tearing Performance				Width Direction	N	Above 25
Temperature Reliability Performance	60℃	Tensile Strength		Length Direction	N/mm	Above 2.0
		Tensile Strength		Width Direction	N/mm	Above 2.0
		Coefficient of Expansion		Length Direction	%	Above 150
		Coefficient of Expansion		Width Direction	%	Above 150
	-20℃	Tensile Strength		Length Direction	N/mm	Above 5.0
		Tensile Strength		Width Direction	N/mm	Above 5.0
		Coefficient of Expansion		Length Direction	%	Above 50
		Coefficient of Expansion		Width Direction	%	Above 50
Curve Resistance Performance (-20℃)					-	Will not crack on the protection film or sheet at -20℃
Joint Stability Performance			Internal Pressure Performance		-	Will not be permeated.
Joint Stability Performance			Peel Resistance Performance		N/mm	Above 1.5
Adhesion Performance (Peel-Out)					N/mm	Above 1.5	Above 1.8
Pitting Performance					-	Will not be permeated after delicate for 48 hours.
Fatigue Resistance					-	No balance and fracture at 20°C and -20°C (1,000 times) and will not separate from the ground

Transportation and Storage

Construction Details

페트로산업 footer

페트로산업

Seoul Office : Tera Tower 2 B-dong, #1304, Munjeong-dong, Songpa-gu, Seoul TEL : 02-3462-9891~5 FAX : 02-3462-7572 EMAIL : petro1@bill36524.com

Yedang Factory : 77 Yedangsandan 4-gil, Godeok-myeon, Yesan-gun, Chungnam TEL : 041-337-9071 FAX : 041-338-9071

Gyeongsan factory : Gongdan 2-ro, Jinryang-eup, Gyeongsan-si, Gyeongsangbuk-do TEL : 053-856-0135 FAX : 053-856-0134